Mooring Buoy Aquamoor-650

The mooring buoys are rotationally-moulded from Uv-stabilised virgin polyethylene to a 7mm wall thickness, and are foam filled with closed-cell polyurethane to prevent water ingress in the unlikely event of damage to the outer layer. The large mooring tube with 82.5mm ID will accept mooring chain of up to 20mm in diameter. The mooring tube is not moulded into the buoy but slides into a tubular section that runs down the centre of the buoy enabling the tube to be replaced at any stage during the product’s service life.

  • High visibility colours
  • No painting ever
  • Strong, polyethylene construction
  • Large galvanised mooring tube
  • Polyurethane foam filled to prevent water ingress
  • Clear identification with optional graphics
  • AQM650: 70kg reserve buoyancy

Options

  • Mould-in graphics
  • Mooring solutions available include chain or synthetic, hardware and sinkers

Certification

  • IALA : Surface colours compliant to IALA E-108
  • Quality Assurance: ISO9001:2015